English

Harmonizer Recommends a Very High Speed

For example: The Material is 1018 steel, and the maximum speed of the machine is 12,000 RPM. The current condition is 1990 RPM and in chatter. You record the chatter with Harmonizer, and it returns a speed of 10,218 RPM or 1685 SFM (cutter is 0.630" diameter), far in excess of the manufacturer's recommended surface speed limit of 500 SFM. The solution is to go back to the original settings, convert the 500 SFM to RPM, in this case 3032 RPM.

Knowledge Base ArticleSpeedCast Support

Overview

For example: The Material is 1018 steel, and the maximum speed of the machine is 12,000 RPM. The current condition is 1990 RPM and in chatter. You record the chatter with Harmonizer, and it returns a speed of 10,218 RPM or 1685 SFM (cutter is 0.630" diameter), far in excess of the manufacturer's recommended surface speed limit of 500 SFM. The solution is to go back to the original settings, convert the 500 SFM to RPM, in this case 3032 RPM.

Change the Maximum Spindle Speed to 3032 RPM and rerun the test.

Harmonizer returns a stable speed of 2543 RPM.

TIP: In Harmonizer the Max Spindle Speed is not always the maximum speed of the spindle, but rather the maximum allowable speed for the tool and material you are testing.

Procedure

  1. 1

    Step 1

    Change the Maximum Spindle Speed to 3032 RPM and rerun the test.

日本語

ハーモナイザーは非常に高速を推奨しています

例えば: 材料は1018鋼で、機械の最高速度は12,000RPMです。現在の状態は 1990 RPM で、チャタリング中です。Harmonizerでチャタリングを記録すると、メーカーが推奨する表面速度制限である500 SFMをはるかに超える10,218 RPMまたは1685 SFM(カッターの直径は0.630インチ)の速度が返されます。解決策は、元の設定に戻り、500 SFM を RPM (この場合は 3032 RPM) に変換することです。

Knowledge Base ArticleSpeedCast Support

Overview

例えば: 材料は1018鋼で、機械の最高速度は12,000RPMです。現在の状態は 1990 RPM で、チャタリング中です。Harmonizerでチャタリングを記録すると、メーカーが推奨する表面速度制限である500 SFMをはるかに超える10,218 RPMまたは1685 SFM(カッターの直径は0.630インチ)の速度が返されます。解決策は、元の設定に戻り、500 SFM を RPM (この場合は 3032 RPM) に変換することです。

最大スピンドル速度を 3032 RPMに変更し、テストを再実行します。

ハーモナイザーは2543RPMの安定した速度を返します。

ヒント:Harmonizerでは、最大スピンドル Speed is not always the maximum speed of the spindle, but rather the maximum allowable speed for the tool and material you are testing.

Additional Details

Harmonizer empfiehlt eine sehr hohe Drehzahl

Deutsch

Zum Beispiel: Das Material ist 1018 Stahl und die maximale Drehzahl der Maschine beträgt 12.000 U / min. Der aktuelle Zustand beträgt 1990 U/min und ist im Rattern. Sie zeichnen das Rattern mit dem Harmonizer auf, und es wird eine Drehzahl von 10.218 U/min oder 1685 SFM zurückgegeben (der Fräser hat einen Durchmesser von 0,630 Zoll), was weit über der vom Hersteller empfohlenen Geschwindigkeitsbegrenzung von 500 SFM liegt. Die Lösung besteht darin, zu den ursprünglichen Einstellungen zurückzukehren und die 500 SFM in RPM umzuwandeln, in diesem Fall 3032 RPM.

Ändern Sie die maximale Spindeldrehzahl in 3032 U/min, und führen Sie den Test erneut aus.

Knowledge Base ArticleSpeedCast Support

Overview

Ändern Sie die maximale Spindeldrehzahl in 3032 U/min, und führen Sie den Test erneut aus.

Der Harmonizer liefert eine stabile Drehzahl von 2543 U/min.

TIPP: Im Harmonizer ist die maximale Spindeldrehzahl nicht immer die maximale Drehzahl der Spindel, sondern die maximal zulässige Drehzahl für das Werkzeug und das Material, das Sie prüfen.